Hardware > Switches

Who can modify this feature?

• Partner
• Company/Network Admins with write and read access
• Meter Support

To view the Meter network switches installed in your network navigate to Hardware > Switches. This will bring you to the Switches overview page.

Every switch is listed here, with a quick view of each switch’s MAC address, IP address on the Meter management network, STP priority, and a count of open ports.

Clicking on a switch label will take you to Switch's Insights Page

Clicking on the edit button will reveal the following options:

The Meter deployments team initially sets the STP priority and Label. It is not recommended to change these without looping in Meter support. If you would like to change these for any reason, please don’t hesitate to reach out!

Clicking on the actions menu will reveal the following options:

The “View details” button will open the switch’s insights page.

The “Flash LEDs” button will make the switch flash all of it’s LEDs in unison so the switch can be easily located in a network rack.

The “Reboot” button will reboot the switch. Note the switch needs to be reporting as Online in the Dashboard for this functionality.

The “Refresh config” button will force the switch to pull a new config from the Dashboard. Note the switch needs to be reporting as Online in the Dashboard for this functionality.

If you have any questions about the Switches or need further assistance, feel free to contact Meter Support at support@meter.com or submit a ticket on the Meter Dashboard.